Lift Junkie 2″ Lift Kit to suit Isuzu D-Max 2011+ / Holden Colorado 2012+

Using a number of premium brand components these suspension systems enhance the usability of your vehicle with up to 2 inches of extra ride height. This kit is perfect for those who have a bullbar or plan to add one in the future. Avoiding ground obstacles, carry heavier loads, greater handling control or simply improving driver sight lines, Lift Junkie is the ultimate combination of increased suspension functionality and affordability. No modification is required, just replace the original components with the uprated heavy duty shocks and springs.

What you get in the kit:

• Dobinsons Front Coil Springs (C21-386* or C59-134*)
• RAW 4×4 Rear Leaf Springs(RL788)
• RAW 4×4 Rear Leaf Spring U-Bolts ( U005)
• SuperProRear Leaf Spring Bushings ( SPF2670K, SPF2231-4K, SPF2240K)
• RAW 4×4 Front Shocks (G6302)
• RAW 4×4 Rear Shocks ( G6027M3Y)

*C21-386 has full wire upper end of springs. C59-134 has ground flat upper end.

About the Shocks:

Heavy Duty Range: RAW 4×4 Nitro is a gas shock absorber that will improve ride quality by reducing body roll and increasing vehicle stability.

Combining an expanded body for extra oil capacity and nitrogen gas for additional cooling purposes. RAW Nitro shock absorbers will outlast many of its well-known rivals at a competitive price.

Well suited to the recreational 4WDer who is looking to lift the vehicle and improve overall suspension performance.

Features:

• Increased bore size reducing internal operating pressure for a longer lasting shock
• High performance oil for consistent performance in all types of conditions
• HNBR seal with wiper lip designed to keep dust and grime out
• Large body for extra capacity
• Highly charged nitrogen gas to resist shock absorber fade

About the Leaf Springs:

RAW 44 leaf springs have been designed to achieve the best possible ride for your 44 whilst increasing your ride height, load carrying ability and improving overall suspension travel.

Features:

• Made from high quality steel -Military Wrapped Eyes for extra safety in the instance of a main leaf breaking
• Diamond Cut – Drawn tapered & diamond cut leafs to aid in load distribution over a larger surface area
• Anti Friction Liners – Scrag testing ensures the spring takes a permanent set, reducing the chances of the leafs sagging. Inter leaf anti friction liners between the springs leafs to reduce friction and improve ride comfort (Excludes some part numbers)
• Clips – High strength alignment clips with nylon insulators to reduce wear and noise. Nyloc nuts are used to secure the clips to prevent losening which can lead to tyre damage.
• Two Stage Leaf Pack – Two stage leaf pack for additional support when the vehicle is heavily laden. Please note: The above features are represented as an example, some springs in our range may not have all the above features

About the Coils:

Dobinsons Spring & Suspension proudly manufacture the highest quality replacement coil springs for many different applications to ISO9001:2008 international quality standards from their state of the art manufacturing facility in Central Queensland, Australia.

WORLDS LARGEST

RANGE OF COIL SPRINGS

Dobinsons proudly boast one of the worlds largest range of coil springs including raised height and heavy duty 4wd springs, lowered performance passenger car springs, O.E. replacement springs and heavy duty springs for commercial vehicles.

As Dobinsons coil springs are manufactured in-house, Dobinsons can manufacture smaller quantities and in most cases there are many different coil spring options available for your vehicle. This ensures the customer receives the best spring to suit their application and avoids a One Size Fits All scenario, especially important when selecting the correct spring rates and ride heights.

When matched with a set of corresponding Dobinsons Shock Absorbers, Dobinsons can provide you with unrivalled performance and handling.

FULLY SCRAGGED & LOAD TESTED

All Dobinsons coil springs are load tested and scragged 100% to eliminate subsequent spring sag, and ensure they meet and maintain the required specifications. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

POWDER COAT FINISH

A durable powdercoat finish provides extreme protection against the elements.

Load Rating:

These kits come with50-100kg ratedfront coils and 0-250kgs rated rear leaf springs. If you need different rated parts or have any questions about load rating please contact us for further information.